The Machinist and Mesothelioma

According to the Bureau of Labor Statistics, nearly 500,000 individuals work as machinists and tool and die makers in the United States. It is crucial to establish that most of these machinists, tools, and die makers were exposed to asbestos during that time. The Machinist and Mesothelioma went hand in hand up to the cold war. If you are a machinist and mesothelioma has affected your life, we can help.

Why is Asbestos Exposure Hazardous?

Asbestos exposure is hazardous since it can cause mesothelioma and asbestos lung cancer. Reports indicate that asbestos was used mainly in industrial machinery and equipment before the 80s. The asbestos mineral was primarily used to make equipment and tools resistant to high temperatures.

The machinists relied on machinery and tools to create wooden and metal parts. In addition, they were responsible for repairing and maintaining machines that contained asbestos. Some frequently handled products made from asbestos were valves, gaskets, and insulation materials.

Where Is Asbestos Found?

Asbestos can easily be found in the air if the mineral's material or equipment is shaped, cut, drilled, or subjected to forceful actions. The fine particles of asbestos float in the air and can be inhaled easily by machinists. This was more common before the end of the cold war in the late 80s. Sadly, machinists and mesothelioma can be typical, especially for machinists that worked up to the later 90s.

What Happens when Asbestos is Inhaled?

Mesothelioma can happen. Once ingested or inhaled, it is imperative to note that asbestos particles penetrate the deepest part of the intestines or lungs. They exist in these body parts for ages as they slowly mutate the cells around them. Eventually, a disease caused by asbestos arises after several years, depending on the host and other factors.
Besides lung cancer and mesothelioma, asbestos exposure can also result in other ailments, including asbestosis. This is a chronic lung condition symptomized:

  • by shortness of breath
  • dry cough
  • crackling sound while breathing
  • chest pain and tightness, and clubbing.

Most diseases caused by asbestos are treatable but extremely expensive to manage. This is why individuals who have been exposed to asbestos exposure sue their employers for mesothelioma claims. The company will settle all medical financial obligations if the plaintiff gets a favorable verdict. Others receive all the money equivalent to treating asbestos-related illnesses, including:

  • lung cancer
  • mesothelioma
  • asbestosis
  • and others.

Who are Machinists?

The Machinist and Mesothelioma

A machinist works with precision metal components, instruments, and tools. In the past century, asbestos-containing machines were also the responsibility of machinists. They routinely handled asbestos insulation, gaskets, and valves. According to the Bureau of Labor Statistics, machinists work with various duties and functions, including:
Cutting tools and components are aligned, secured, and adjusted.

Ensuring parts are turned, milled, drilled, shaped, and ground to specifications.

Asbestos Covered Parts or Surfaces

Set up and run various machine equipment to make precision metal components and devices.

Who are Precision Machinists?

Precision machinists generally create tiny batches or one-of-a-kind objects in huge batches. Precision instrument manufacturers work on mechanical instruments, fabricating, modifying, and repairing them. Precision metal parts are produced by machinists using tools such as:

  • lathes
  • Milling machines
  • and machining centers.

They design and execute the operations required that create specific items. Machinists rely on their understanding of metalworking and machine tool expertise.

Who Are Tool and Die Makers?

Tool and die makers design and maintain the tools used in many forms of production. These individuals repair, construct, and service equipment and fittings following industry requirements and safety laws. Tool and die makers operate in manufacturing and production settings, primarily in plants and machine rooms, and answer to supervisors and shift administrators. People who specialize in this sector must be committed to working overtime under strict and demanding schedules. If you're a machinist or tool and die maker, and mesothelioma has hurt your body and life, you may be able to receive compensation. Contact us today to learn more about filing a mesothelioma claim.

The Machinist and Mesothelioma: Exposure to Asbestos from Lathes

A lathe is a type of machine tool used to process cylindrical objects. Its primary use is for machining cylinders and cones. Drilling and screw machining is also possible to develop using a lathe machine. A lathe spins it and presses a tool against it to process material. In general, lathe machines' primary uses are for:

  • Thread machining,
  • End face machining
  • Groove
  • Hole machining
  • Taper machining with an angle, such as a conical shape, and circular arc machining.

Asbestos fibers can break out from the attached material when disturbed. These fibers float in the air the machinists are breathing. When the lathe is used, asbestos particles are released into the air, causing a cloud of acceptable debris. Metal filings and asbestos fibers mix within this cloud. As metal filings fall out of the air, asbestos fibers float for hours, if not days, before dropping to the ground.

Were you a machinist, and mesothelioma has been a part of your life? If so, you might have a mesothelioma claim.

The Machinist and Mesothelioma: Exposure to Asbestos from Grinding Machines

A grinder machine's use smoothens the edges of die-cast pieces or parts. It is a fast-rotating abrasive wheel that closely touches the component or piece's uneven surfaces. The wheel removes microscopic particles from the element, leaving a smooth surface behind.

If the chipped particles include asbestos fibers, there are dangerous health risks. Grinding creates a debris cloud that pollutes the air the machinist breathes, leading to asbestos-related illnesses like mesothelioma.

Machinists and Asbestos Exposure from Materials They Handle

Machinists came into contact with asbestos in the workplace practically every day until the late 1980s. Machinists who worked near equipment with asbestos insulation inhaled asbestos dust and were at an increased risk of acquiring deadly illnesses. According to requirements, machinists often fabricate metal components and equipment, such as:

  • industrial valves
  • pipe and pump systems
  • and ship parts.

Asbestos Insulation

The most frequent asbestos material utilized in manufacturing was asbestos insulation. As a sort of wrap insulation, its use was in walls, ceilings, floors, and around pipes and boilers. Workers indirectly or directly exposed to these raw asbestos fibers are at risk for serious health complications.

Tell your doctor about your history of asbestos exposure. For example, ask for cancer testing if you were a former industrial worker who had trouble breathing or digesting food. It is possible to enhance treatment results by detecting asbestos-related disorders early on.

Rights of Machinists to Compensation after Exposure to Asbestos

Because there is significant latency between exposure to asbestos and the manifestation of symptoms, the machinist and mesothelioma diagnoses can take a long time. Sadly, the diagnosis can come after the disease has progressed and spread.

According to research, lung cancer was prevalent among machinists who worked for at least one year between 1945 and 1960.

Asbestos Victims and Their Families May Receive Compensation Due to a Successful Claim or Lawsuit

After being hit with a slew of litigation, several businesses declared bankruptcy. These corporations often formed asbestos trust funds as part of bankruptcy procedures. Current and future claimants will receive compensation via these trust funds. Contact us to learn more.

If You're a Machinist and Mesothelioma Has Impacted Your Life, We May Be Able to Help

Before 1980, handling tools and machinery put machinists at risk of asbestos exposure. Machinists may have been exposed to asbestos when handling different products such as:

  • valves
  • adhesives
  • sealants
  • insulation
  • gaskets
  • drill presses
  • boilers

Most of these products were produced mainly in America by asbestos companies. They then faced mesothelioma lawsuits, forcing them to close down. The machinist and mesothelioma were forever, and sadly, grouped. If you're a machinist and mesothelioma has affected your life, reach out today.

Liability of Asbestos Cases

Asbestos liability refers to a company's legal responsibility for asbestos-related injuries. Individuals who have been damaged by exposure to asbestos may be able to sue for damages if a court holds a firm accountable for their injuries. Each year, tens of thousands of mesothelioma and other asbestos-related cancers are identified yearly. Most asbestos exposure is caused by occupational exposure, which involves coming in touch with toxic material while at work. However, second-hand exposure and asbestos contamination of household items such as talcum powder can also trigger illnesses.

To claim damages under strict responsibility, the plaintiff does not have to show that the defendant was negligent. The defendant's duty was broken simply because the substance was inherently harmful. Furthermore, if the defendant is a business supplier that manufactures or sells asbestos products, the defendant has a legal obligation to the plaintiff.
A mesothelioma lawyer can help you find the defendants, collect evidence, and present your case. Reach out to us today.

Other Industries with a Higher Risk of Cancer Diagnosis

Do You Have A Claim?

If you've been hurt by negligent company, product, or service, report it here.
Our expert partner attorneys offer free consultations for your claim.

Copyright © 2024
Privacy - Terms Conditions